Keysight N777-C Series User Manual page 96

5 N777-C Instrument's Front Panel Display
96
How to Set the Maximum Power for the Sweep Range?
Pressing Set P
sweep range. Pressing Set P
constant for the whole sweep.
How to Perform a Sweep?
There are three sweep modes:
• Stepped - which dwells at wavelengths that are separated by a certain
step size,
• Continuous - which sweeps continually at the speed you set, and
• Manual - which you can run each step manually.
You cannot turn the laser off by pressing the Active hardkey on the
NOTE
Tunable Laser front panel, while a wavelength sweep is running.
You can press Stop Sweep and, then, press the Active hardkey on the
Tunable Laser front panel, to turn off the laser.
/Sweep sets the power to the maximum for the selected
max
/Sweep ensures the power will be
max
Keysight N777-C Series Tunable Laser Family User's Guide