Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Keysight N9398C
Summary of Contents for Keysight N9398C
- Page 1 Keysight N9398C/F/G and N9399C/F DC Block Operating and Service Manual...
- Page 2 FAR 27.401 or DFAR could result in personal injury or death. 227.7103-5 (c), as applicable in any Do not proceed beyond a WARNING technical data. notice until the indicated conditions are fully understood and met. Keysight N9398x and N9399x Operating and Service Manual...
-
Page 3: Waste Electrical And Electronic Equipment Directive 2002/96/Ec
Printing Copies of this Document To print copies of this document, download the PDF from the Keysight website: – Visit www.keysight.com. – Enter the document’s part number (see page 2) in the Search box. – Click GO. -
Page 4: Sales And Technical Support
Sales and Technical Support To contact Keysight for sales and technical support, refer to the support links on the following Keysight websites: – www.keysight.com/find/dc-blocks (product-specific information and support, software and documentation updates) – www.keysight.com/find/assist (worldwide contact information for repair and service) -
Page 5: Table Of Contents
........16 Keysight N9398x and N9399x Operating and Service Manual... - Page 6 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK Keysight N9398x and N9399x Operating and Service Manual...
- Page 7 Keysight N9398x and N9399x DC Block Operating and Service Manual General Information DC Block Overview Key Features This chapter provides an overview of the Keysight N9398x and N9399x DC Blocks.
-
Page 8: General Information
General Information DC Block Overview The N9398C/F/G and N9399C/F are small, light-weight, coaxial DC blocks. They are designed to apply AC drive signals to a device while eliminating any DC voltage or current components. The DC blocks cover broad frequency ranges and choice of connector types. Each... -
Page 9: Specifications
Keysight N9398x and N9399x DC Block Operating and Service Manual Specifications For the characteristics and specifications of the N9398C/F/G and N9399C/F DC Blocks, refer to the Technical Overview document at https://literature.cdn.keysight.com/litweb/pdf/5989-4544EN.pdf. - Page 10 Specifications THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK Keysight N9398x and N9399x Operating and Service Manual...
- Page 11 Keysight N9398x and N9399x DC Block Operating and Service Manual Installation Installation Operating and Service Instruction This chapter provides you installation information and simple verification steps of the DC Blocks.
-
Page 12: Installation
“Sales and Technical Support” on page 4). Keysight will arrange for repair or replacement of the damaged or defective equipment. Keep the shipping materials for the carrier’s inspection. 3 If you are returning the instrument under warranty or for service, repackaging the instrument requires original shipping containers and materials or their equivalents. -
Page 13: Operating And Service Instruction
2 Measure the S21 or/and S12 of the DC block. Compare with the specification to verify its electrical performance. 3 Measure the S11 and S22 of the DC block. Compare with the specification to verify its electrical performance. Figure 3-1 Connection to perform Quick Check Keysight N9398x and N9399x Operating and Service Manual... -
Page 14: Making Connections
The N9398F and N9399F 2.4-mm connectors mate with other 2.4-mm connectors of the opposite sex. The N9398G 1.85-mm connectors mate with other 1.85-mm connectors of the opposite sex. Figure 3-2 2.4-mm/1.85mm Connector Diagram Keysight N9398x and N9399x Operating and Service Manual... - Page 15 Installation N9398C/N9399C The N9398C and N9399C have a male 3.5-mm connector on one end and a female 3.5-mm connector on the other side. These connectors mate with the opposite sex 3.5-mm or SMA connectors. Continued mating with SMA connectors could degrade the 3.5-mm connector.
-
Page 16: Performance Test
Service Instructions Technical Assistance For technical assistance, you can contact your local Keysight Technologies Call Center. All major contacts are provided in the manual. Maintenance The connectors, particularly the connector faces, must be kept clean. - Page 17 This information is subject to change without notice. Always refer to the English version at the Keysight website for the latest revision. © Keysight Technologies 2019 Edition 3, April 2, 2019 Printed in Malaysia N9398-90001 www.keysight.com...