Table of Contents
Advertisement
5
N777-C Instrument's Front Panel Display
104
Edit LAN Settings
The Configure LAN window also allows you to edit the currently used LAN
settings. To do so, click on the Edit LAN button.
The Edit dialog will appear as shown in the figure below:
This dialog allows you to edit the following LAN configuration parameters:
•
Select the "Use automatic configuration" checkbox if you want to the
system to use the automatic configuration.
•
Unselect the "Use automatic configuration" checkbox if you want to
provide some other configuration.
•
Enter the descriptions for the following LAN configuration parameters:
•
IP Address
•
Subnet Mask
•
Default Gateway
•
Once done, click Apply Changes button for these settings to take
effect.
Keysight N777-C Series Tunable Laser Family User's Guide
Advertisement
Table of Contents
