Keysight N777-C Series Tunable Laser Family User's Guide
Figure 30
How to Set the Repeat Mode?
The Repeat Mode determines how the instrument performs a multi-cycle
sweep.
•
Select Twoway, if you want to start every odd sweep cycle at [λ Start]
and to start each even sweep cycle at [λ Stop].
•
Select Oneway, if you want to start every sweep cycle at [λ Start] and to
end every sweep cycle at [λ Stop].
Figure 31
illustrates how these modes work for a three-cycle wavelength
sweep.
Figure 31
N777-C Instrument's Front Panel Display
The Parameters for a Stepped Wavelength Sweep
Repeat Modes
5
95