Table of Contents
Advertisement
4
N777-C Web User Interface Reference
68
For a Continuous sweep, Step sets the wavelength interval between
NOTE
output triggers, if you have set Output Trigger Mode to Step Finished,
see
How to Use Output Triggering
Figure 27
How to Set the Repeat Mode?
The Repeat Mode determines how the instrument performs a multi-cycle
sweep.
•
Select Twoway, if you want to start every odd sweep cycle at [λ Start]
and to start each even sweep cycle at [λ Stop].
•
Select Oneway, if you want to start every sweep cycle at [λ Start] and to
end every sweep cycle at [λ Stop].
Figure 28
sweep.
The Parameters for a Stepped Wavelength Sweep
illustrates how these modes work for a three-cycle wavelength
Keysight N777-C Series Tunable Laser Family User's Guide
on page 71.
Advertisement
Table of Contents
