Table of Contents
Advertisement
Keysight N777-C Series Tunable Laser Family User's Guide
How to Set the Wavelength Sweep?
The Sweep Parameters
These are the parameters for the wavelength sweep:
•
Sweep Mode - see
•
Repeat mode - see
•
Sweep Speed - the speed of a continuous sweep,
•
Cycles - the number of times the sweep is repeated,
•
Dwell - the amount of time spent at the wavelength during each step,
for a stepped sweep
•
Sweep Start - the wavelength at which the sweep begins,
•
Sweep Stop - the wavelength at which the sweep ends,
•
Sweep Step - the size of the change in the wavelength for each step of
a sweep,
•
Run/Stop Sweep - to run and start the sweep.
N777-C Web User Interface Reference
How to Perform a Sweep?
How to Set the Repeat Mode?
on page 69,
on page 68.
4
67
Advertisement
Table of Contents
