GLP JDC Line 500 User Manual page 29

German Light Products®
DMX Mode 6: MultiPix Advanced
158 DMX Channels
White segments overall control gives
overall output control of the
individually controllable White
segments at the end of this DMX mode
(see below). It offers the standard
strobe channels for intensity and strobe
effects.
RGB segments overall control gives
overall output control of the
individually controllable RGB segments
at the end of this DMX mode (see
below). It offers the standard strobe
channels for intensity and strobe
effects and a CTC Channel which lets
you adjust the color temperature of
the white output.
Strobe phase lets you shift the timing of
RGB segments strobe by 1 – 359°
relative to the strobe on the White
segments. A 180° shift will result in a
flipflop between flashes on the two
strobes.
Background color sets a background
color on the RGB segments. As
standard, the main color output always
has higher priority than the
background color. You can define
how background color and main color
are mixed using Background color on
the Control/Settings channel.
White segments individual control
adjusts the output of the individual
White segments. The overall output of
these segments is determined by the
White segments overall control
channels (see above).
RGB segments individual control
(upper, lower) adjusts the color of the
individual RGB segments. The output of
these segments is determined by the
RGB segments overall control channels
(see above).
White strobe
1 Intensity coarse
2 Intensity fine
Duration
3
4 Flash rate (Shutter)
5 Intensity effects (Strobe mode)
6 Control / Settings
RGB strobe
7 Intensity coarse
8 Intensity fine
9 Duration
10 Flash rate (Shutter)
11 Intensity effects (Strobe mode)
12 CTC
13 Strobe phase
Background color
14 Intensity background
15 Red background
16 Green background
17 Blue background
18 White background
White segments individual control
19 White segment 01
... ...
38 White segment 20
RGB segments individual control
(upper, lower separately)
39 Red segment 01
40 Green segment 01
41 Blue segment 01
... ...
156 Red segment 40
157 Green segment 40
158 Blue segment 40
The RGB segments are split into upper
and lower halves with individual control
of each half. This gives individual RGB
control of 40 RGB pixels in total.
Control / Settings lets you configure the
fixture remotely via DMX.
Rev. 20210318-01
Mode 6
MultiPix Advanced
29