Table of Contents
Advertisement
www.glp.de
DMX Mode 3: W Strobe + RGB Pixel
84 DMX Channels
White strobe with FX runs on the White
segments only and has an effects
engine with 50 patterns. Crossfading
sets the duration of changes between
the steps in each pattern. Transition
sets the duration of changes from one
pattern to the next.
Pattern chain length lets you set up a
chain of fixtures for the pattern to run
across in a chase by defining the total
number of fixtures in the chain. Pattern
chain position lets you set which
position in the chain the fixture will
occupy: first, second or third etc. fixture
in the chain.
RGB segments overall control gives
overall output control of the
individually controllable RGB segments
at the end of this DMX mode (see
below). It offers the standard strobe
channels for intensity and strobe
effects and a CTC Channel which lets
you adjust the color temperature of
the white output.
Strobe phase lets you shift the timing of
the RGB segments strobe by 1 – 359°
relative to the strobe on the White
segments. A 180° shift will result in a
flipflop between flashes on the two
strobes.
Background color sets a background
color on the RGB segments. As
standard, the main color output always
has higher priority than the
background color. You can define
how background color and main color
are mixed using Background color on
the Control/Settings channel.
26
White strobe with FX
1
2
3
4
5
6
7
8
9
10
11
12
RGB segments overall control
13
14
15
16
17
18
19
Background color
20
21
22
23
24
RGB segments individual control
25
26
27
...
82
83
84
RGB segments individual control adjusts
the color of the individual RGB segments.
The output of these segments is
determined by the RGB segments overall
control channels (see above).
The upper and lower halves of each
segment are controlled together, giving
20 RGB pixels.
Control / Settings lets you configure the
fixture remotely via DMX.
JDC Line 500 User Manual
Mode 3
W Strobe + RGB Pixel
Intensity coarse
Intensity fine
Duration
Flash rate (Shutter)
Intensity effects (Strobe mode)
Control / Settings
Pattern select
Pattern step / speed
Pattern step crossfade
Pattern transition
Pattern chain length
Pattern chain position
Intensity coarse
Intensity fine
Duration
Flash rate (Shutter)
Intensity effects (Strobe mode)
CTC
Strobe phase
Intensity background
Red background
Green background
Blue background
White background
Red segment 01
Green segment 01
Blue segment 01
...
Red segment 20
Green segment 20
Blue segment 20
Advertisement
Table of Contents
