GLP JDC Line 500 User Manual page 28

Hide thumbs Also See for JDC Line 500:
Table of Contents

Advertisement

www.glp.de
DMX Mode 5: Multipix
98 DMX Channels
White segments overall control gives
overall output control of the
individually controllable White
segments at the end of this DMX mode
(see below). It offers the standard
strobe channels for intensity and strobe
effects.
RGB segments overall control gives
overall output control of the
individually controllable RGB segments
at the end of this DMX mode (see
below). It offers the standard strobe
channels for intensity and strobe
effects and a CTC Channel which lets
you adjust the color temperature of
the white output.
Strobe phase lets you shift the timing of
the RGB segments strobe by 1 – 359°
relative to the strobe on the White
segments. A 180° shift will result in a
flipflop between flashes on the two
strobes.
Background color sets a background
color on the RGB segments. As
standard, the main color output always
has higher priority than the
background color. You can define
how background color and main color
are mixed using Background color on
the Control/Settings channel.
White segments individual control
adjusts the output of the individual
White segments. The overall output of
these segments is determined by the
White segments overall control
channels (see above).
RGB segments individual control
adjusts the color of the individual RGB
segments. The output of these
segments is determined by the RGB
segments overall control channels (see
above).
28
White segments overall control
1
2
3
4
5
6
RGB segments overall control
7
8
9
10
11
12
13
Background color
14
15
16
17
18
White segments individual control
19
...
38
RGB segments individual control
39
40
41
...
96
97
98
The upper and lower halves of each RGB
segment are controlled together, giving
individual RGB control of 20 RGB pixels in
total.
Control / Settings lets you configure the
fixture remotely via DMX.
JDC Line 500 User Manual
Mode 5
MultiPix
Intensity coarse
Intensity fine
Duration
Flash rate (Shutter)
Intensity effects (Strobe mode)
Control / Settings
Intensity coarse
Intensity fine
Duration
Flash rate (Shutter)
Intensity effects (Strobe mode)
CTC
Strobe phase
Intensity background
Red background
Green background
Blue background
White background
White segment 01
...
White segment 20
Red segment 01
Green segment 01
Blue segment 01
...
Red segment 20
Green segment 20
Blue segment 20

Advertisement

Table of Contents
loading

Table of Contents