User Features
The PACSystems™ RX3i CPE330 is a richly featured programmable
controller CPU equipped with 64 Mbytes of built-in program memory and
two independent high-speed Ethernet interfaces. It is ideally suited for
multi-tier communications and for synchronizing large amounts of data.
Its metal housing provides superior noise immunity.
The CPE330 is programmed and configured over Ethernet via PAC
Machine Edition™ (PME) software. It resides in the RX3i main rack and
supports all RX3i I/O and Intelligent Option modules, up to 32K I/O
points.
Supports an updated OPC stack and certificate management
▪
Supports PME's new GUI management interface for OPC UA configuration
▪
integration (start, stop, restart, clear, and provisioning mode)
Supports the new PAC Security tool available for certificate trust
▪
management for clients and servers
Supports RX3i Hot Standby Redundancy CPU with PROFINET
▪
embedded PROFINET or using rack-mounted IC695PNC001 PROFINET
Controllers.
Supports RX3i Hot Standby Redundancy with Ethernet (EGD) & Genius I/O.
▪
Enabled simplex PROFINET I/O controller with support for up to 32 I/O
▪
devices and update rates of 1 – 512 ms. I/O device update rates of 8 ms
3
PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide
®
I/O using
GFK-2941K