About The Radio Act - Seiko S830 Instructions Manual

Table of Contents

Advertisement

1
Do not use the watch in scuba diving or saturation diving.
The  various  tightened  inspections  under  simulated  harsh 
environment, which are usually required for watches designed for 
scuba  diving  or  saturation  diving,  have  not  been  conducted  on 
this watch. For diving, use special watches for diving.
The radio  waves  emitted  from  this product may have  a 
negative impact and cause an accident due to a malfunction.
・  Do not use this product near medical equipment.
The  radio  waves  may  affect  pacemakers  and  electric  medical 
equipment  .  Do  not  use  it  in  crowded  places  such  as  packed 
trains, and inside of medical institutions.
・    D o not use this product near automatic control devices such as 
automatic doors and fi  re alarm systems.
Set this product to the in-fl  ight mode in places such as 
inside of airplanes in which emission of radio waves is 
limited in order to not use the communication function. 
The radio waves emitted from this product may have a negative 
impact on other equipment.
106
1
When  water  runs  directly  from  a  faucet  onto  the 
watch,  very  high  water  pressure  is  applied.  The 
measurement  accuracy  of  the  sensor  to  measure 
pressure  temporarily  degrades,  and  the  values  of 
altitude  and  atmospheric  pressure  may  fluctuate.  If 
very  high  water  pressure  is  applied  to  the  body  of 
the  watch,  wait  for  about 10  minutes  or  more  until 
the  measurement  accuracy  of  the  pressure  sensor 
recovers and then measure again.
Do not pour running water directly from faucet onto 
the watch.
The water pressure of tap water from a faucet is high enough to 
degrade  the  water  resistant  performance  of  a  water  resistant 
watch for everyday life.
108
WARNING
CAUTIONS
CAUTIONS
This product can be used only in Japan.
Since some other countries have limitation on use of radio waves, 
the person who uses this product may face penalties for usage.
Note  that  if  this  product  is  used  near  devices  that 
emit  strong  magnetism  or  in  places  with  a  strong 
magnetic  field,  an  error  may  occur  in  measurement 
of the direction, etc., or it may become impossible to 
measure with this device. 
In  addition,  a  correct  measurement  is  impossible 
in  environments  with  metal,  etc.,  in  buildings  that 
block  the  earth s  magnetism.  Take  measurements 
in  environments  where  there  are  no  metal  shields 
around.
About the Radio Act
■ About the Radio Act
   T his  product  is  certified  as  a  low 
power  data  communication  system 
based on the Radio Act in Japan.
   I t  is  not  necessar y  to  obtain  a  li-
cense,  etc.,  to  use  this  product  in 
Japan.
   I t is illegal to disassemble and modi-
fy this product.
 Authentication number
■ About radio frequency
   T he  frequency  used  by  this  product 
may  be  used  also  by  other  wireless 
equipment.  To  prevent  radio  wave 
interference  with  other  radio  equip-
ment,  be  careful  about  the  following 
when using this product.
   T his  radio  product  uses  the  2.4  GHz 
band.  As  a  modulation  method,  the 
GFSK modulation method is adopted, 
and the interference distance is 10 m.
1
107
1
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents