② T o start mountaineering recording, press and hold Button Ⓔ with the target
mountaineering plan displayed. Hold down the button continuously after REC
HOLd appears. When the outer circumference graphic rotates once, re-
cording is started, and the REC mark blinks.
※If a mountaineering plan is selected, on the screen the PLAN mark turns on.
T o start recording without a mountaineering plan, press Button Ⓒ and press and hold
Button Ⓑ with --- displayed. Then, the PLAN mark is not turned on.
T o complete recording, press and hold Button Ⓔ during mountaineering recording.
Hold down the button continuously after STOP HOLd appears. When the outer
circumference graphic rotates once, recording is completed, and the REC mark
is turned off . A record number (LOG) is set for the recorded contents, and a maxi-
4
mum of 10 mountaineering records are stored in the body. When the number of
records exceeds 10, the records are automatically deleted from the oldest one.
※ T he mountaineering records are automatically sent to the application and stored when
synchronization of settings except for automatic time synchronization is performed.
Ⓒ
Ⓔ
Ⓒ
Press and hold
Ⓔ
Altimeter display
Mountaineering plan
display
mountaineering recording
158
④ W hen recording is started with a mountaineering plan selected, Mountain-
eering plan achievement rate is graphically displayed on the screen.
※ W hen recording is made without a mountaineering plan, Mountaineering plan achieve-
ment rate is not displayed.
Descending
The progress from recording start is displayed graph-
achievement rate
ically for both the accumulated ascending altitude
100%
0%
and accumulated descending altitude of the plan.
One ■ represents 5% .
Display example .
In this fi gure, the achievement rates are 65% and 20% for
Ascending
4
achievement rate
ascending and descending respectively.
0%
100%
※ T he mountaineering plan achievement rate is displayed based on the
Mountaineering plan
information of the plan that has been set and the altitude information
achievement rate display
calculated from sensor measurement.
E rrors may occur due to change of the atmospheric pressure and infl u-
ence of the measurement accuracy, in addition to the plan information.
⑤ T
o check the progress during mountaineering recording, press Button Ⓒ
lected mountaineering plan no. (PLAN) is displayed, and the mountaineering plan achieve-
ment rate at that time is displayed (ascending and descending are displayed alternately).
T
he item is switched by pressing Button Ⓒ
contents rotate once or a non-operation time continues for about 20 seconds, the
display returns to the altimeter display.
※ W hen the progress of mountaineering recording is displayed, operations to end or stop
temporarily are impossible.
160
Descending
100%
achievement rate
0%
Ascending
achievement rate
0%
100%
Switching to
Mountaineering recording
Mountaineering recording
in progress
(with plan)
(without plan)
. First, the se-
. When you press Button Ⓐ or the display
③ T o stop mountaineering recording temporarily, press and hold Button Ⓒ during recording. Hold down the
button continuously after PAUSE HOLd appears. When the outer circumference graphic rotates once,
recording is interrupted. PAUSE appears at the top row, and the REC mark is turned on.
T
o restart recording, press and hold Button Ⓒ
pears. When the outer circumference graphic rotates once, recording is restarted, and the REC mark blinks.
※ O ne mountaineering record can be recorded for up to 24 hours, including pauses. When
24 hours have passed, a stop sound beeps, and measurement is completed automatically.
※ T o fi nish mountaineering recording during a pause, press and hold Button Ⓔ. When STOP HOLd appears
and the outer circumference graphic rotates once, the REC mark is turned off , and recording is completed.
※The climbing speed is not shown while you stop the mountaineering record temporarily.
Mountaineering
record finished
Ⓒ
Ⓔ
Press and hold
Ⓔ
Mountaineering recording
in progress
Ⓒ
Press and hold
Temporary mountaineering
in progress
record stopped
Shifting temporary mountaineering record stopped
Ⓒ
Ⓒ
Ⓒ
Plan no.
※The mountaineering plan achievement rate is displayed in 5% increments.
※ I n case of recording without a plan, the plan no. and the mountaineering plan achieve-
ment rate are displayed as ----.
. Hold down the button continuously after REC HOLd ap-
Ⓔ
Mountaineering record finished
Ⓔ
Press and hold
Ⓒ
Ⓒ
Press and hold
Temporary stop
Shifting restarted
Altitude record state
Ⓒ
Ⓒ
Ⓒ
Ⓒ
Mountaineering plan
Average climbing speed
Accumulated
achievement rate
(ascending)
ascending altitude
(ascending)
Alternate
Alternate
display
display
Mountaineering plan
Average climbing speed
Accumulated
achievement rate
(descending)
descending altitude
(descending)
4
Mountaineering recording in progress
159
Ⓒ
Ⓒ
Ⓒ
Altitude and time when
recording starts
4
Ⓒ
Ⓒ
Alternate
display
Current consumed
energy
161