⑥ About reverse mode
W hen a scheduled mountaineering plan is ended halfway to go back in the same route, the progress
from the current point to the starting point is displayed with subtraction by setting reverse mode.
P ress and hold Button Ⓓ for 5 seconds or more during mountaineering recording. After ADJ ap-
pears, a confi rmation sound beeps, and REV HOLd is displayed. When you hold down the button
continuously and the outer circumference graphic rotates once, another confi rmation sound beeps
and the reverse mode is set, and
is turned on at the bottom row. Then, subtraction from the
outer circumference is performed.
※ O nce the reverse mode is set, it cannot be cancelled until the end of mountaineering recording.
Mountaineering recording in progress
Altitude correction
4
Ⓓ
Press and hold
Ⓓ
※ W hen setting the reverse mode during mountaineering recording
with a mountaineering plan selected, the achievement rate is dis-
played by subtracting from the achievement rate at that point.
※ W hen setting the reverse mode during mountaineering recording
without a mountaineering plan, the achievement rate is displayed by
subtracting with that point as 100% .
※ E ven in the reverse mode, operations to stop temporarily or com-
plete recording are possible.
When checking the progress of mountaineering recording in the re-
verse mode, REV is displayed at the top row on the initial screen.
162
(7) How to call mountaineering records
You can check details of mountaineering records in the body of the watch.
A maximum of 10 mountaineering records are stored in the body of the watch. If
the number exceeds 10, the records are deleted automatically from the oldest one.
※ T he mountaineering records can be managed/viewed in the application. The number of records that
can be managed in the application varies depending on the capacity of the memory of the smart-
phone.
※ T he mountaineering records are automatically sent to the application and stored when synchroniza-
tion of settings except for automatic time synchronization is performed.
① T o display a mountaineering record, press and hold Button Ⓒ in the altitude mea-
4
surement display. The latest mountaineering record is displayed, and the previ-
ous record is displayed every time you press Button Ⓒ
※ T hey cannot be displayed during mountaineering recording. Check after recording is completed.
Altitude measurement display
Latest record
Ⓒ
Ⓒ
Press and hold
・ T he record no. is displayed at the top row, required time at the middle row,
and recording start date at the bottom row.
164
Switching to reverse mode
Ⓓ
Press and hold
Ⓓ
A confirmation
sound beeps.
A confirmation
sound beeps.
A f t e r r e v e r s e
m o d e s e t t i n g ,
the subtraction
display in which
the ascending/de-
scending graphic
display moves in
the opposite direc-
Mountaineering recording in progress
tion appears.
.
Next record
Ⓒ
Ⓒ
Ⓒ
Ⓒ
The oldest
⑦ T o delete mountaineering plans, press Button Ⓒ while the REC mark is off , and
press and hold Button Ⓓ with a mountaineering plan displayed. When CLR ?
ALL appears and the outer circumference graphic rotates once, all the moun-
taineering plans registered in the body of the watch are deleted with a comple-
tion sound.
A t that time, all the plans are deleted collectively. They cannot be deleted indi-
vidually.
※ D uring recording of a mountaineering record, the mountaineering plans cannot be de-
leted.
※ I f the application and the settings are synchronized, the plans are overwritten by those
set on the application side.
Ⓒ
Ⓒ
Altitude measurement
display
② T o check details, press Button Ⓔ to switch to detailed display while the mountain-
eering record no. you want to check is displayed. The item is switched every time
you press Button Ⓔ
.
・SPEED
: Average climbing speed (ascending/descending) (alternate display)
・ TOTAL
: Accumulated ascending/descending altitude (alternate display)
・Kcal
: Consumed energy
・BASE/FIN : Altitude when recording starts/altitude when recording ends, time (alternate display)
・MAX/MIN : Maximum/minimum altitude, arrival time (alternate display)
Latest record
Average climbing speed
(ascending)
Ⓔ
Ⓔ
Alternate
display
record
Ⓒ
Average climbing speed
(descending)
Ⓓ
A confirmation
Press and hold
Ⓓ
Mountaineering plan
display
Accumulated
Consumed energy
Altitude and time
ascending altitude
when recording starts
Ⓔ
Ⓔ
Ⓔ
Ⓔ
Ⓔ
Ⓔ
Alternate
display
Accumulated
Altitude ・ Time you
descending altitude
finished record
4
sound beeps.
Completion of
deletion
163
Maximum altitude
and time
4
Ⓔ
Ⓔ
Alternate
Alternate
display
display
Ⓔ
minimum altitude
and time
Ⓔ
165