Table of Contents
Advertisement
K. ARTICULATING LEGREST &
ELEVATING LEGREST (Optional)
1. Installation
a. Follow same steps as for swing-away
hangers and footrests. (p. 40)
2. Adjustment
a. List legrest to chosen position. Legrest
will lock in place.
b. To lower legrest, press release lever
(1) forward and lower legrest to chosen
position. Legrest will lock in place.
L. CASTER PLATES
(not available on the 500)
Note: Use a torque setting of 50-65 in./lbs.
(5.6-7.3 N . m) when adjusting caster angle.
1. Angle Adjustment
a. Loosen the two eccentric bolts that
secure the caster assembly. Do not
remove the clevis pin.
b. Place a large right triangle against the
table surface and the front surface of
the caster bearing housing. This will
align the caster stem rotational axis
perpendicular to the floor surface.
c. When alignment is satisfactory,
retighten the two eccentric bolts.
d. Repeat the process for the other.
X . S E T U P & A D J U S T M E N T
37
1
930300 Rev. E
Advertisement
Table of Contents
