F. CASTER FORKS
Note: Two-hole caster forks allow you to adjust
the seat height or seat angle.
a. For a standard 18 1/2" (470 mm) front
seat height:
1. Remove caster wheel bolt (1) and
bearing spacers (not shown).
2. Move caster into the bottom fork
position (2).
3. Replace caster wheel bolt and
bearing spacers. Tighten bolt.
4. Repeat steps on other side. Make
sure to adjust both the same.
b. For a low 17 1/2" (445 mm) front seat
height:
1. Remove caster wheel bolt and
bearing spacers (1).
2. Move caster into the top fork
position (3).
3. Replace caster wheel bolt and
bearing spacers. Tighten bolt.
4. Repeat steps on other side. Make
sure to adjust both the same.
X . S E T U P & A D J U S T M E N T
33
3
1
2
930300 Rev. E