Sunrise Medical Breezy 600 Series User Instruction Manual & Warranty page 31

1. To Install
a. Depress button (1) to draw second
button (not shown) inside anti-tip
tube (3).
b. Insert tube (3) into frame (4).
Release button.
c. Rotate tube (3) until button (2) locks
in place in mounting hole (not
shown).
2. To Turn Anti-Tip Tube Up
a. Depress button (1) to draw second
button (not shown) inside anti-tip
tube (3).
b. Hold button in and turn anti-tip tube
up. Release button.
c. Repeat with other side.
3. To Adjust Wheel Height
a. Depress button (6).
b. Raise or lower wheel tube (7) to
one of three predrilled holes and
lock it in place.
c. Raise or lower wheel tube (7) to
one of three predrilled holes and
lock it in place.
Note: You may need to use a longer or shorter
wheel tube section to attain correct height of
1 1/2" to 2" (38 mm to 51 mm). You can obtain
these from your authorized supplier.
BREEZY 600 SERIES
1. Inserting Anti-Tip Tubes Into
Receiver
a. Press the rear anti-tip release lever on
the anti-tip tube so that both release
pins are drawn inside.
b. Insert into the anti-tip tube receiver.
c. Turn the anti-tip tube down until
release pin is through the receiver
mounting hole.
d. Insert second anti-tip tube the same way.
X . S E T U P & A D J U S T M E N T
31
4
1
3
7
6
930300 Rev. E