4
Do one of the following:
–
–
A dialog box appears asking you to verify the destination that you selected for the
transferred file. If it is the correct destination, click OK.
5
Click Save to transfer the file.
A message will appear at the bottom of the screen providing details concerning the
status of the file transfer. After the transfer is complete, the message disappears and
the transferred file is underlined in the workstation or instrument's file manager.
Displaying and modifying connection settings
You can review information about the current remote session at any time.
To display session information
•
Select the Session icon key.
Session details appear. This page gives information on the connection in real time.
To modify connection settings
1
Select the Session icon.
2
Disconnect the session using the Disconnect button.
3
On the session screen, select the Network Settings icon.
The connection settings screen appears. The default connection is defined as
Smart-guess (default).
4
To modify the settings, select Forced settings, and then modify SSI tunnel port
and/or Internet proxy as needed.
The Internet proxy configuration is available exclusively if the port selected is
Alternative port (443) and if HTTPS packing is selected.
5
After configuring the settings, select Back to main page.
August 2020
If you are transferring a file from your PC or mobile device to the instrument,
click Upload.
If you are transferring a file from your instrument to the workstation, click
Download.
NOTE:
If the default parameters need to be modified, it is recommended you discuss
it with your local network administrator.
ONA-800 Getting Started Guide
22142812, D1 R004
Chapter 3 Smart Access Anywhere
Displaying and modifying connection settings
Page 29