Setting Up Internet Connection; Establishing A Connection To Stratasync - Viavi CellAdvisor JD700B Series User Manual

This sharing capability allows engineers who have a problem they cannot resolve to request help from an
expert who can analyze the trace file via StrataSync using applications such as JDViewer, JDFileViewer,
JDPowerMeter, etc. from anywhere without having to be at the instrument, helping resolve problems even
faster.

Setting up Internet connection

Your JD700B series instrument must have Internet access to be able to connect to the StrataSync. You can
set up for wireline or wireless Ethernet network connection. You can also use your mobile device's data
network such as the Bluetooth tethering on an Android-based smartphone and the Personal Hotspot on an
iOS-based smartphone. If you want to share your mobile's data network, you need to connect your
instrument to your mobile device.
Procedure
Connect one of the Parani-UD100 Bluetooth adapters to the USB port of your JD780B or
1
JD740B series.
Turn on Bluetooth on your mobile device, and then activate its tethering or hotspot.
2
On Android mobile devices:
a
b
c
d
On iOS mobile devices:
a
b
c
d
On your JD780B or JD740B series instrument, press the SYSTEM hot key.
3
Select System Configuration > Remote Interface > Bluetooth > Connect.
4
Press the Scan soft key to discover your mobile device.
5
You will find your mobile device from the list on the screen.
Highlight your mobile device name from the list, and then press the Select soft key.
6
A dialog box appears.
Tap the Connect button to pair and connect.
7
On your mobile device, enter 0000 in the PIN field, and then tap the OK button or Pair button.
8
If the connection is successful, "(Paired & Connected)" appears next to the name of your mobile
device on your instrument. If the connection is unsuccessful, repeat steps 6 and 7.
Press the PREV hard key to return to the Bluetooth Information screen that displays the paired
9
device and connected service including your CellAdvisor's IP Address.

Establishing a connection to StrataSync

Procedure
Press the SYSTEM hot key.
1
Go to Settings > Connections > Bluetooth.
Check the box for Visible to all nearby Bluetooth devices to make your mobile
device discoverable by your instrument.
Go to Settings > More networks > Tethering and portable hotspot.
Check the box for Bluetooth tethering to enable sharing your mobile device's Internet
connection with your instrument.
Go to Settings > Bluetooth.
Turn on Bluetooth.
Go to Settings > Personal Hotspot.
Turn on Personal Hotspot to make your mobile device discoverable by your
instrument and enable sharing your mobile device's Internet connection with your
instrument.
NOTE
If you want to use the Web-based remote control described on page 59 using this
Bluetooth tethering, record the IP address assigned to your JD700B series to have
access to the instrument on your smartphone's Web browser.
JD700B Series User's Guide
Chapter 2 Getting Started
51