Powering The Base Unit - Viavi ONA-800 Getting Started Manual

Figure 7
4 Insert the hex key in the brass fittings on the rear of the module and tighten the
internal captive fasteners to secure the module to the display.
5 Place the ONA-800 base onto the module, ensuring the mating connectors are
aligned, as shown in
Figure 8
6 Using the hex key, tighten the captive fasteners on the rear of the base that
secure it to the module.
7 Re-attach the CAA/OTDR modules or back cover.

Powering the base unit

Power is supplied to the instrument by the battery or the AC power adapter. For the
ONA-800, the adapter is supplied with the instrument. Use of AC power adapters or
batteries other than those supplied with your ONA-800 is not recommended as other
slices/modules may be supplied with incompatible adapters or batteries. When
August 2020
Solution module to screen
Figure 8.
ONA-800 base to module
ONA-800 Getting Started Guide
22142812, D1 R004
Chapter 1 Getting started
Powering the base unit
Page 7