Installation; Fitting The Kitchen Tap; Installing The Appliance; Water Connection - STIEBEL ELTRON SNU HOT Installation Manual

INSTALLATION

Installation
5. Installation
5.1

Fitting the kitchen tap

ø 35
5.2

Installing the appliance

f Mark out the holes for drilling using the installation tem- f
plate, see "Installation template" chapter.
f Drill the holes and insert suitable rawl plugs. f
f Secure the mounting bracket with suitable screws. f
f Hang the appliance onto the mounting bracket. f
Note
Excess cable can be stored in the cable compartment.
14 | SNU HOT | HOT 3in1
5.3

Water connection

Note
If the tap is not being connected to a central DHW supply
system, seal the connection hose with a twin connector.
Material losses
!
The strainer and the flow limiter must be installed for the
appliance to function.
Material losses
!
f Do not subject the appliance to water pressure. f
f Do not interchange the connection hoses. f
Fitting the hot water outlet hose
1
1 Fitted hot water outlet
You may trim the hot water hose to length, as required.
Material losses
!
Never extend the hot water hose.
Tightening the connection fittings
f Counter-hold with a suitable spanner when tightening the f
fittings.
www.stiebel-eltron.com