STIEBEL ELTRON SNU HOT Installation Manual page 15

INSTALLATION
Installation
Routing the connection hoses
Note
Ensure that the connection hoses are not kinked or under
tension during installation.
f Route the connection hoses with a constant rise. f
5.3.1 Installation without water filter (hardness range 1)
2
1
1 Hot water outlet
2 Cold water supply to the appliance
3 Cold water supply to the tap
4 Hot water supply to the tap
Hose connections without water filter
3
2
1 4
1 Hose ferrule
2 Hose retainer
fPrior to fitting the hose, push the hose retainer onto the hose and
then onto the hose ferrule.
To help fit the hose retainer, lubricate the hose with a little washing-up
liquid. Then push the flexible hose into the hose clip ferrule as far as it
will go.
3 Flexible hose
4 Offset connector with flow limiter
5 Strainer for hot water supply
6 Strainer for cold water supply
www.stiebel-eltron.com
3
4
Plastic hose with flexible hose
Long flexible hose with blue wire
Short flexible hose with blue wire
Short flexible hose with red wire
5
6
5.3.2 Installation with water filter
Material losses
!
Use only the approved water filter systems; see "Acces-
sories" chapter.
2
1
6
1 Hot water outlet
2 Cold water supply to the filter
3 Cold water supply to the tap
4 Hot water supply to the tap
5 Water filter
6 Cold water supply to the appliance Flexible hose from water filter sys-
Installation with water filter and flow meter
2
1
8
1 Hot water outlet
2 Cold water supply to the filter
3 Cold water supply to the tap
4 Hot water supply to the tap
5 Display unit
6 Water filter
7 Flow meter
8 Cold water supply to the appliance Flexible hose from water filter sys-
3
4
5
Plastic hose with flexible hose
Long flexible hose with blue wire
Short flexible hose with blue wire
Short flexible hose with red wire
tem
3
4
5
7 6
Plastic hose with flexible hose
Long flexible hose with blue wire
Short flexible hose with blue wire
Short flexible hose with red wire
Flow meter
With cartridge change indicator
tem
SNU HOT | HOT 3in1 | 15