Installation Instructions - Heta SCAN-LINE SOLID C Operating And Installation Instructions

The frame is made of fibreglass-reinforced concrete elements, making it
highly resistant to thermal stress.
The concrete elements are cast, which means there may therefore be
variations in surface and structure.
If the concrete elements are damaged, use the repair mortar provided.
The frame surfaces can be painted without priming. Use a vapour-perme-
able acrylic or latex paint, possibly a cement based structure paint.

Installation Instructions

Contents
2. Installation instructions .................................................................... 18
2.1 Distance requirements ..................................................................... 18
2.2 Floor ................................................................................................. 18
2.3 Chimney connection ........................................................................ 18
2.4 Combustion air ................................................................................. 19
2.5 Clearances for installation EN 13 240 ............................................... 20
2.6 Stovedrawings/measurments ........................................................... 20
2.7 Fitting the flue collar .......................................................................... 21
2.8 Installation of the stove ............................................................... 21-24
2.9 Rear flue outlet .................................................................................. 25
3. Connecting external air supply from below ...................................... 26
4. Connecting external air supply from behind ..................................... 27
5. Appendix A ....................................................................................... 28
Remember
The stove and chimney installation, must comply with
local regulations, including those referring to national
and European standards.
17