Heta Scan-Line 7 Series Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Heta Manuals
  4. Wood stove
  5. Scan-line 7 Series
  6. Operating and installation instructions

Heta Scan-Line 7 Series Operating And Installation Instructions

Hide thumbs Also See for Scan-Line 7 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
oPeratinG anD installation
instrUCtions
Scan-Line 7-SerieS
APPROVED FOR USE IN SMOKE CONTROL AREAS WHEN
BURNING DRY WOOD LOGS OR AUTHORISED FUELS
(When fitted with a permanent stop on the primary and secondary air)
Scan-Line 7c
Scan-Line 7D
Scan-Line 7B
www.heta.dk
en
Danish DesiGn . Danish QUality . Danish ProDUCtion
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Scan-Line 7 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Heta Scan-Line 7 Series

Summary of Contents for Heta Scan-Line 7 Series

  • Page 1 APPROVED FOR USE IN SMOKE CONTROL AREAS WHEN BURNING DRY WOOD LOGS OR AUTHORISED FUELS (When fitted with a permanent stop on the primary and secondary air) Scan-Line 7c Scan-Line 7D Scan-Line 7B www.heta.dk Danish DesiGn . Danish QUality . Danish ProDUCtion...

  • Page 2: Installation Instructions

    The Scan-line 7 series has been ap- proved according to the EN 13240, With your new stove you should have NS 3058/3059, 15a B-VG. received the following: a.

  • Page 3: Draft Conditions

    Draft conditions your chimney. Poor draft may result in smoke being The Scan-Line 7 series can be instal- emitted from the stove when the door led with a horisontal straight back is opened. The minimum chimney outlet.
  • Page 4 Reduced draft can occur • Poor smoke extraction (poor draft conditions) due to a cold chimney when: or bad weather conditions can be • The difference in temperature compensated for by increasing is too small – due to insufficient the airflow into the stove. chimney insulation, for example.

  • Page 5: Chimney Fires

    of the control handles placed at the Wood kg/m Wood kg/m back of the side panel. The secondary Beech Willow airflow handle is the upper handle and Alder the one for the the start-up airflow is the one below. See figure 1. Scotch The secondary airflow is completely pine...

  • Page 6: Reduced Burning

    embers. Distribute the embers across the fire to ignite the flue gases. This the bottom grate, place pieces of fuel produces a high effect and keeps the (max 0.7 kg) on the embers in a single glass panel completely clear of soot layer perpendicular to the firing ope- as the secondary air “washes”...

  • Page 7: Operational Problems

    Take care when emptying the ash pan, as cin- ders can continue to burn in the ash for long periods of time. Stove data table in accordance with eN 13240 testing Stove Nominal Smo- Fuel Draught Nominal Heat Distance to flamma- Distance to Stove fluegas...
  • Page 8 5 m installed to an outside air supply. hour/m then a ventilator equivalent to The Heta SL800 requires a permanent 550mm per kW output will be re- air vent opening of minimum 550sq quired (4kW x 550mm = 2200 mm...

  • Page 9: Maintenance

    MAINTeNANCe The surface of the stove has been Door sealing trea-ted with heat-resistant paint. It is recommened at least once a year The stove should be cleaned with a to check the sealing of the door to see damp cloth. Any damage to the sur- if it is intact and correctly fitting.
  • Page 10 SCAN-LINe 7C Wall-mounting the stove outlet to rear flue outlet, see page 12. There are four wall brackets on the Attach the wall fitting (can be used as back of the stove. The lower wall a drilling template) to a non-combusti- brackets on the stove just rest on the ble wall with four bolts dimensioned to lower side screws of the wall fitting.
  • Page 11 Fig. 3...
  • Page 12 SCAN-LINe 7D Scan-Line 7D is available on solid To operate the rotary base, turn the base and on rotary base. small handle in front of the stove (see picture, right) Scan-Line 7 D on solid base Scan-Line 7 D on rotary base. (Rotates 45 degrees til each side)
  • Page 13 Optional connection of external air flow (fresh air) SL 7D Rear connection • Insert cover plate 66x83 mm (supplied) through the duct and loosely down into the bottom so that it covers the hole from below • You can now connect the ø100 connector on the stove to external air flow hose.
  • Page 14 Connection through column from below • Loosen screw in ø100 connector and attach cover ø105 mm (sup- plied) • You can now connect external air flow up through the column...
  • Page 15 Connection of external air flow (fresh air) via rotating floor base 7 b • Remove the ashtray from the stove. • Tap or screw to remove and de- tach the four adjusting screws in the base plate. • To mount the rotating base, follow instructions in ”Scan-Line Rota- ting Base Instructions for Use”, without tightening the central...
  • Page 16 emptying the ash pan, fig. 4-6 lubricate ash pan Grease not included. 2 x Grease - Cleaning after sweeping the chimney and replacing the stones. fig 7-11...
  • Page 17 Changing to back smoke outlet fig. 12-19...
  • Page 18 Secretary of State or Minister in the acquire an ”unauthorised fuel” for use devolved administrations. within a smoke control area unless The Scan-Line 7 series have been it is used in an ”exempt” appliance recommended as suitable for use in (”exempted” from the controls which...

This manual is also suitable for:

Scan-line 7bScan-line 7cScan-line 7d

Table of Contents