Appendix: Inspection Lists - ProActiv HUSK-E Usage Instructions

Adaptive bike

Table of Contents

HUSK-E usage instructions

33 Appendix: Inspection lists

Initial inspection: After 200 km or after 5 months

Serial number:

____________________

Kilometre reading: ____________________

Check that all screws/fastening elements are firmly seated

Carry out a functional and safety check of all lights (if fitted), steering

and adaptation to the product and the adapted

wheelchair/wheelchairs

Carry out a functional and safety check of the adapter

Carry out a functional and safety check of the brakes and, where

necessary, replace the brake fluid, brake pads, brake cables, and

tyres on the product and wheelchair

Check the electrical connections

Check, adjust /set, clean and oil the gear components

Check the spoke tension of the drive wheel and, if required, correct

the tension/recentering and inspect the axle nuts of the drive wheel

for firm seating (tightening torque for Shimano: 40 Nm)

OK / carried out = OK | not OK = not OK | resolved = the fault was corrected

Comments:

Rehabilitation specialist dealer:

______________________________________

First name and last name of contact:

______________________________________

To maintain the warranty, the completed inspection list must be sent by e-mail or post to PRO ACTIV within four weeks of the

inspection.

OK /

carried out

Stamp:

_________________________________________

Date/signature

not OK

resolved

Table of Contents