Storage; Transport; Securing Handling Of The Product; Passenger Transport In Vehicles - ProActiv HUSK-E Usage Instructions

Adaptive bike
Table of Contents

Advertisement

HUSK-E usage instructions
Subject to changes to the links provided by the
component manufacturers.

21 Storage

Store the product on an easy-to-clean surface
in a dry environment, preferably at room
temperature from +15°C to +25°C.
For storage, please also observe the
instructions in the other sections of these
usage instructions and in the component and
drive manufacturers' usage instructions
included with the delivery, in particular the
points about the rechargeable batteries and
the electrical drive.
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
not be exposed to any aggressive
environmental influences (especially salt) or to
any strong solar radiation. Because of the
effect of salt water in the winter and the
humidity on rainy days, it is not recommended
to store the product in the garage.
If the product is not used or is stored over
a longer period, if necessary, before using it
again, we recommend having a rehabilitation
specialist dealer give it a general function and
safety check.
When the rechargeable batteries are
stored or taken out of use, they should only be
stored with a charge status of between 50%
and 70%; they must be charged to 70% at the
latest every two months. Before re-use, the
rechargeable batteries must be completely
charged.
Store the rechargeable battery in a dry
location where it is protected against damage
and unauthorized access. The rechargeable
battery should never be exposed to extreme
temperature fluctuations and it should always
be protected from moisture during storage to
prevent corrosion of the plug contacts. If the
product is stored in a cool location or in a
location with temperature fluctuations, it is
recommended that the rechargeable battery be
removed and stored separately at an
appropriately tempered location.

22 Transport

22.1 Securing handling of the product

The product must be uncoupled from the
wheelchair when loading. When folded down,
the product can be held by the cross tube of
the bottom bracket and the wheel for loading
and transporting. As such, it is useful to
actuate the parking brake to prevent the wheel
from turning when loading the product.
Figure 36: Pack size

22.2 Passenger transport in vehicles

When transporting in
vehicles, it must be noted
that the product is not
approved for use as a seat in
vehicles or disabled person's
vehicles when combined with a manual
wheelchair. The product must be uncoupled
from the wheelchair and secured in the vehicle.
For transporting the wheelchair user or other
persons with their wheelchairs in vehicles,
observe the instructions in the usage
instructions of the wheelchair.
22.3 Securing the product in a vehicle
(without a person)
To reduce the weight when loading, the
rechargeable batteries can be removed from
the product and stored separately. The product
and all associated components must be
secured during transport so that they are not
damaged and do not become a hazard to
24

Advertisement

Table of Contents
loading

Table of Contents