Honda BF35A Service Manual page 420

13)Attach a thin sealing tape around the threads at the
end of the piston rod.
14)Apply ATF to the top of the piston rod and O-ring of
the outer tube install the outer tub to the piston rod.
To install turn the outer tube by hand taking care
not to damage the O-ring in the outer tube.
15)Tighten the outer tube 2 or 3 turns, then apply LOC-
TITEB 241 or equivalent to the thread of the outer
tube as shown.
16)Tighten the outer tube to the specified torque using
the 30 mm lock nut wrench.
TORQUE: 64 Nom (6.5 kgfom, 47 Ibfoft)
17) Remove the pistonkylinder assembly from the vise
and clean off the residual LOCTITEB from the outer
tube.
[l]
OUTER TUBE
\P
1 '
L
Apply sealing tape.
1
[21
,
[l] OUTER TUBE
1 2 1
Apply LOCTITEa 241
or equivalent.
[3]
BOTTOM PIECE
[s.]
[ 4 1
LOCK NUT
WRENCH
30
x
40
I I
0791 6-9690000
[l] OUTER TUBE
13-21