Honda BF35A Service Manual page 418

BF40A-BF50A
2)
Apply ATF to a new O-ring, and install it on the free
piston.
3) Apply ATF to a new O-ring and install it on the piston
4) Apply ATF to the inner wall of the cylinder.
5)
Install the free piston in the cylinder taking care not to
damage the O-ring, and pour the fresh ATF on the
free piston.
6) Install the piston rod in the cylinder taking care not to
damage the O-ring.
rod.
7) Push in the piston rod until the free piston end aligns
with the bottom end as shown.
8) Apply ATF to a new O-ring, and install it in the bottom
piece.
1 1
1
FREE PISTON
/
121
O-RING
2.0 x28.5 mm
/
a -
1 1
1
PISTON ROD
PI
O-RING
2.0 x 28.5 mm
141 /
CYLINDER
1 1
1
2.0 x 34.5 mm
~
O-RING
[2] BOTTOM PIECE
13-1 9