Honda BF35A Service Manual page 380

BF40AaBF50A
8) Install the separator cover with the two 6 x 28 mm
I
flange bolts and two 6 mm washers and 6 x 40 mm
hex. bolts.
9) Tighten the two 6 x 28 mm flange bolts and two 6 x
40 mm hex. bolts securely.
[l] 6 mm PLAIN
WASHER (2)
\
131
6
mm PLAIN
WASHER (2)
'6 x
40 (2)
10) Connect the 14P connector of the long tiller handle
wire harness to the main wire harness and set the
14P connector to the connector holder.
11) After installation check the throttle operation and gear
shift operation.
15-23