Honda BF35A Service Manual page 404

BF40AoBF50A
6) Remove the outer tube guide using the lock nut I
wrench.
Remove the O-rings from the outer tube guide and
discard them. Replace the O-rings with new ones dur-
ing reassembly.
7) Remove the valve body and cylinder assembly from
the vise.
8) Remove the cylinder/piston assembly from the valve
body, and drain ATF from the cylinder assembly and
valve body.
9) Remove the O-ring from the bottom piece and discard
it. Replace the O-ring with new one during reassem-
bly.
r11
LOCK NUT WRENCH
070PA-ZW40100
GUIDE
[3] O-RINGS
pzizr
r11 [2] BOTTOM PIECE
CY LINDEWPISTON
\ I
/ I
131
I
Do not reuse.
1
VALVE BODY
1315