SPOOL VALVE, SLEEVE, VALVE B
Check the sliding surface of the valve 6 ,
spool
valve,
sleeve for damage, scratches and wear. Replace if nec-
essary.
Standard
10
mm (0.4 in)
2-WAY VALVE
Check the 2-way valve for damage, scratches and wear.
Replace if necessary.
Service limit
6 mm (0.2 in)
OIL TANK
Visually inspect the oil seal installation section of the oil
tank. Replace the oil tank if scratched or damaged.
POWER TRlMfllLT MOTOR
Brush
Measure the brush length.
I
[l]
SLEEVE
SPOOL VALVE
I
f l
[l] OIL SEAL INSTALLATION
SECTION
13-1 2