Access Configuration – ISDN BRI Euro
Select the icon with the number of the access to configure and press
From this menu, you can:
Choose to
Enable Accesses
Specify the
Specify the
Choose to enable the
Select
TEI
The TEI is an identifying number that allows the ISDN exchange to distinguish between different
terminals connected to a common access point. If TEI Fixed is selected, then you must manually
enter the TEI number. Conversely, by not selecting it, the parameter will be set as TEI
Automatic. In this case, the TEI number will be automatically assigned by the exchange and no
further operations in this menu are necessary.
Note:
Normally, the TEI is left as AUTO because an incorrect setting could create
connection problems
Access configuration – ISDN BRI National
Select the icon with the number of the access to configure and press OK.
From this menu you can:
Choose to
Enable Accesses
Specify the
Specify the
Select
TEI
Enable any eventual
.
to be associated with the access.
Number
, if present.
Subaddress
Multinumber
, either Automatic (default) or Fixed.
.
to be associated with the access.
Number
, if present.
SPID
, either Automatic (default) or Fixed.
and enter the appropriate numbers.
SPID2
function by checking the appropriate box.
OK
.
69