Table of Contents
Advertisement
Audio
You can access the following submenus:
.
Inputs
Processing
Outputs
and adjust the ringing and sound volume.
Volume for Ringing and Sound.
For adjust the ringing and sound volume, follow these steps:
1.
Select AUDIO or RINGING from the Volume dropdown menu.
2.
Use the remote control
3.
Choose the desired value, using the remote control
Inputs
Allows for the adjustment of each audio input to the System.
Move to the desired input and press
•
Set the
Gain
•
Enable/disable the input audio stream
•
Enable/disable the
Recommended inputs for video or DVD:
We strongly recommend using "VCR" inputs for signals directly coming from
video-recorders or DVD, because the echo cancellation is disabled on these
inputs.
Recommended inputs for external audio Mixers:
We strongly recommend using the "Line" input for signals directly coming from
an external audio mixer, because echo cancellation can be enabled on this input.
The icon Load default values restore factory values of the audio inputs enabling all the
audio inputs.
Processing
In this menu you can enable/disable the Echo Canceller functions:
•
.
AGC
•
Noise Reduction
Outputs
In this page you can configure audio flows sent to the System Audio outputs.
You can first select Audio outputs from drop down menu, and then select the audio
flow you want to send to the desired output.
To restore factory values click on Load default values icon.
44
.
.
arrow
value for the input
Echo Canceller
.
keys to move the Volume slider control.
OK
, a window will appear where you can:
arrow
keys.
Advertisement
Table of Contents
