Table of Contents
Advertisement
Audio call
If you would like to make an audio-only call (using the System like a normal
telephone), select the AUDIO icon from the
To complete the audio call, follow these steps:
1)
Select the type of call (ISDN, IP-H323, IP-SIP, NIC) from the drop-down
menu.
2)
Enter the number or the alias (IP) you want to call using the keys on the
remote control or the virtual keypad.
3)
Move to the CALL icon and press
remote control key.
To end communication, use the
system will ask you to confirm disconnection.
Secure Connections
The System can manage secure videoconference sessions via encrypted connections,
in both point-to-point and multipoint sessions. To do this, the encryption function
must be enabled: for more information, refer to the "Encryption" section of this
manual.
Once encryption is properly configured, you can make a secure call by following the
same procedure described for a standard call.
Useful information:
The encryption status can be checked on the status bar.
If the encryption is enabled and configured, an icon showing a padlock is displayed on
the status bar.
When in a conference call session, the padlock icon meanings are:
Encryption has been enabled but the function is not active.
Encryption is active.
Encryption is activated only in transmission.
How to receive a call
H
If you are in the
window showing the caller's number. If the automatic answer function (described in a
later section) is not enabled, you will be asked whether or not to accept the call. If you
are in a different page, you will be asked to accept or reject the call whether or not
the automatic answer function is enabled.
30
DISCONNECT
P
and receive a call, a notification will be displayed in a
OME
AGE
H
P
.
OME
AGE
OK
to make the call, or press the
remote control key: if enabled, the
CALL
Advertisement
Table of Contents
