Cameras
This menu allows you to:
.
Settings
Customize
.
Driver
Settings
•
Enable/disable the
•
Enable/disable the
of the local camera. The last position of the Main camera, in case of stand-by of the set top, will
be memorized for being restored to wake up again.
•
Select, from dropdown menu, the video input.
•
Set the values for contrast, brightness and colour in order to obtain a better video image.
A preview window allows the immediate control of changes.
•
Auto Adjust
AutoIris setup of the Main camera.
Customize
Each input could be enabled\disabled (that is, inserted in a selection list), associated
to a Name, associated to a shortcut (
for a quick choice.
To choose a shortcut, select the related icon and press
For the XGA/DVI-I input from the dropdown menu you can chose:
•
Analogical
•
(digital DVI signal input enable)
Digital
•
Automatic
(For XGA/DVI-I input, see cabling scheme)
Note:
DVI-I interface includes digital and analog signals (VGA, XGA, etc.)
Driver
Advanced (Administrator Password Required)
Select driver for Room Camera and other Video Input, and enable the PTZ function
(check MOVE) for all video inputs.
46
.
remote control
Bring Back to place button
button
RED
(analogical DVI signal input enable)
(default; analogical and digital DVI signal input enable)
of the local camera.
YELLOW
Camera
,
,
OK
keys on remote control)
.