System Diagnostics
The System's diagnostics menu allows you to perform tests and checks to verify that
the system is properly working.
H
P
From the
OME
AGE
S
/ D
ETTINGS
IAGNOSTICS
The following page will be displayed:
Terminal test
This option performs an internal test of the system.
The test can be useful to diagnose audio/video problems encountered during a call.
The test uses encoded local audio and video to simulate a connection.
Press any keys to stop the test.
Interfaces
This option performs an internal test of the following interfaces:
•
"A
".
UDIO
For each input and output, peak values, noise and status can be visualized by means of
graphical view-meters; in addition, the transmission and reception streams can be seen.
Finally, it is possible to generate a tone (Tone Loc.) to test the speaker volume, and the selection of
"Tx Tone" during a connection will generate an audible tone at the remote system.
•
"V
".
IDEO
In this section you can view information on the active video input type and the video standard in
use.
•
"N
".
ETWORK
In this menu you can view information about the detected interfaces
For ISDN accesses an LED status indicator is available:
Red –
Yellow –
Green –
90
select:
access is disabled or in error.
access is functioning, but Level 1 is not active.
Level 1 is active.