Aethra Vega X5 User Manual page 64

Aethra vega x5 webcams: user manual
Hide thumbs Also See for Vega X5:
Table of Contents

Advertisement

Menu options are Streaming Management, Enable Streaming and Activation.
a)
Streaming Management
This option permits that the parameters Announcements, Video , Rate,
Address, Port and TTL can be modified by an external application (e.g. from
the Web).
If this option is not selected and a unicast IP address is present in the
Address, then only the system identified by that IP address would be able to
view the stream.
Enable/Disable
If enabled allows la above parameters modification from every external system.
If not enabled, you can define which system or sub-network is enabled to perform such an
operation.
If in the
is 255.255.255.0 the sub-network is selected.
Likewise, if in the
also effects the visualization of the streaming.
Password: allows password protection of streaming management
b)
Enable Streaming
This option permits the parameters Announcements, Video, Rate, Address,
Port and TTL to be changed.
Allows stream viewing according to the limitations imposed by the parameters
"Streaming Management" and "Enable all addresses." If this option is not
selected, streaming will never be activated.
Announcements. This drop-down menu allows you to choose how the
System will notify the user that an external system has requested streaming
activation.
Options:
Activation: The System will display a dialogue box containing a warning
and a video camera icon that will stay in place as a reminder for as long
as streaming is active.
Status: Only the video camera icon will be displayed during streaming.
Confirmation request: A dialogue box will appear to request
confirmation of streaming activation. This option offers an extra level of
protection.
Video. This drop-down menu allows you to choose which video signal is
transmitted when streaming is active.
If the Automatic option is selected, the streaming content will be determined
by the status of the terminal: if the terminal is connected (in either a point-
to-point or multipoint session), video coming from the remote site will be
streamed. If the terminal is disconnected, local video will be streamed.
If the Local option is selected, the system will always stream local video.
64
.
Enable all addresses
the value is 255.255.255.255, a system is selected; if the value
Address mask
field a unicast type IP address has been set up, the limitation
Address
.
.

Advertisement

Table of Contents
loading

Table of Contents