Aethra Vega X5 User Manual page 51

Multi Image Type
a. By selecting AUTO a mixed PIP and PaP function is enabled.
By means of remote control "PIP" key you can switch between PIP
and PaP.
b. By selecting PIP , PIP function is enabled.
c. By selecting PaP , PaP function is enabled.
!
Multi image type must be enabled separately for TV and HighDefTV monitor.
Multi Image Mode
a. By selecting AUTO PIP and PaP functions are enabled only when
needed, that is when number of video flows is greater than available
monitors number, and automatically place video flows (with
precedence to remote ones).
b. By selecting ON PIP and PaP functions are enabled if at least two
video flows are available (in case of unique video flow you have a
full screen image, e.g. when system is not connected)
c. By selecting OFF PIP and PaP functions are disabled.
!
Multi image mode must be enabled separately for TV and HighDefTV monitor.
Multi Image: remote control Self key and monitor info.
Remote control Self key allows to show video flows in different available monitors, choosing
among different combinations.
In the lower right corner of monitor containing GUI, an icon appears with four white monitors
showing available configurations, active configuration being in red.
The icon is hidden when default configuration is active.
.
.
51