Table of Contents
Advertisement
ISDN network interface (option)
In this section you can:
Activate/deactivate:
•
CLIR
number when establishing a call.
•
COLR
number while receiving a call.
Activate or deactivate the
lines are dropped during a call.
Activate the
basic telephone.
Enable/disable the
network errors (such as network SLIP errors) occur during a bonding connection.
In a call, following messages could appear:
Corrupted video received. Please wait...
o
Video received Ok.
o
Corrupted data received. Please wait...
o
Data received Ok.
o
Network error recovery: re-establishing call...
o
Call established. Please wait...
o
Down-speed, connection rate.
o
Select the
Euro
•
Activate or deactivate the
•
Select the
•
Activate or deactivate the
protocol level 3 from ETS1 to 1TR6).
•
Activate or deactivate the
In the
Access Configuration
you need.
It is advisable to disable any unused ISDN lines.
Changing from one kind of network to the another will require a system restart.
68
(Calling Line Identity Restriction): if enabled, system will not transmit its
(Connected Line Identity Restriction): if enabled, system will not transmit its
Downspeed
function in order to allow a phone call when the remote system is a
FALLBACK
Bonding Recovery
or
Network.
National
5ESS
or
mode ((for National ISDN only).).
64K
56K
1TR6
QSIG
section select
function that is automatically called when one or more
function in order to cope with a situation in which
protocol (for National ISDN only).
function (for Euro ISDN only, allows you to change the
protocol (for Euro ISDN only, ISDN signaling protocol).
or
and configure all the ISDN lines
BRI
PRI
Advertisement
Table of Contents
