Access Configuration - Isdn Bri Euro; Access Configuration - Isdn Bri National - Aethra Vega X7 Use And Installation Manual

Access Configuration – ISDN BRI Euro
Select the icon with the number of the access to configure and press OK.
From this menu, you can:
Choose to "Enable Accesses".
Specify the "Number" to be associated with the access.
Specify the "Subaddress", if present.
Choose to enable the "Multinumber" function by checking the appropriate box.
Select "TEI", either Automatic (default) or Fixed.
The TEI is an identifying number that allows the ISDN exchange to distinguish between
different terminals connected to a common access point. If TEI Fixed is selected, then you must
manually enter the TEI number. Conversely, by not selecting it, the parameter will be set as TEI
Automatic. In this case, the TEI number will be automatically assigned by the exchange and no
further operations in this menu are necessary.
Note:
Normally, the TEI is left as AUTO because an incorrect setting could create
connection problems
Access configuration – ISDN BRI National
Select the icon with the number of the access to configure and press OK.
From this menu you can:
Choose to "Enable Accesses".
Specify the "Number" to be associated with the access.
Specify the "SPID", if present.
Select "TEI", either Automatic (default) or Fixed.
Enable any eventual SPID2 and enter the appropriate numbers.
59