Cameras
This menu allows you to:
Settings
Customize
Driver
Settings
•
Enable/disable the "remote control" of the local camera.
•
Enable/disable the "Bring Back to place button"
of the local camera. The last position of the Main camera, in case of stand-by of the set top, will
be memorized for being restored to wake up again.
•
Select, from dropdown menu, the video input.
•
Set the values for contrast, brightness and colour in order to obtain a better video image.
A preview window allows the immediate control of changes.
•
Auto Adjust button
AutoIris setup of the Main camera.
Customize
Each input could be enabled\disabled (that is, inserted in a selection list), associated to a Name,
associated to a shortcut (RED, YELLOW, Camera keys on remote control) for a quick choice.
To choose a shortcut, select the related icon and press OK.
For the XGA/DVI-I input from the dropdown menu you can chose:
•
Analogical (analogical DVI signal input enable)
•
Digital (digital DVI signal input enable)
•
Automatic (default; analogical and digital DVI signal input enable)
(For XGA/DVI-I input, see cabling scheme)
Note:
DVI-I interface includes digital and analog signals (VGA, XGA, etc.)
Driver
Advanced (Administrator Password Required)
Select driver for Room Camera and other Video Input, and enable the PTZ function (check "MOVE") for all
video inputs.
45