YOKOGAWA ScopeCorder DL950 User Manual page 16

3.
After entering the displayed setting, to move to the next step, tap Next, or select Next using
the jog dial or arrow keys, and press SET.
You can also select a specific setup step by tapping the step you want to set or by selecting
the step using the jog dial or arrow keys and pressing SET.
Returns to the previous step
4.
After setting the last step, tap Finish, or select Finish using the jog dial or arrow keys, and
press SET. The setup is complete.
Setup Details
For details on the settings of each application, see the chapter or section explaining the applicable
setup procedure.
IM DL950-02EN
1.4 Configuring with the Application Menu
Advances to the next step
Setup steps
Setup menu
Finishes the setup
1-7