Table of Contents
Advertisement
6. On the Select Job screen, use the arrow buttons to select the job you want to use.
7. If you want to change the scan settings, press the down arrow and use the arrow buttons to select
from the following options:
• To slow down the scanning speed, set the Slow setting to On.
• To skip double feed detection when scanning originals such as envelopes or plastic cards, set the
DFDS Function setting to On.
• To stop scanning when a double feed is detected, select Double Feed Stop Timing and press
OK. Use the arrow buttons to select a timing option.
• To stop scanning when a paper feed error is detected or the original is fed askew, select Paper
Protection and press OK. Use the arrow buttons to select the setting you want to use.
Note: Turning this function on will not always prevent damage to your originals.
• To detect dirt on the glass surface inside the product, select Detect Glass Dirt and press OK. Use
the arrow buttons to select the setting you want to use.
• To detect a double feed error when scanning multiple originals, set the Ultrasonic Double Feed
Detection setting to On.
• To set a timeout when using the Automatic Feeding Mode, select Automatic Feeding Mode
Timeout and select the settings you want to use.
Note: This setting is available when you scan from the Quick Send buttons or Presets.
8. Press the OK button to view the job settings.
9. Use the arrow buttons to scroll through the job settings and make any desired changes.
Note: If Disable job setting changes on control panel is set to On in Document Capture Pro or
Document Capture, you cannot change the settings.
10. Press the
Parent topic:
Scanning Using Web Services for Devices (WSD) - Windows
You can scan originals to a computer from the product control panel using WSD (Web Services for
Devices). The Computer (WSD) function lets you manage network scanning in Windows 10, Windows
8.x, or Windows 7.
start button to start scanning.
Scanning Using the Product Control Panel
63
Advertisement
Table of Contents
