Irc-6 Infrared Remote Control; Irc-6 Operation - Chauvet DJ Wash FX Hex User Manual

O
PERATION

IRC-6 Infrared Remote Control

The Wash FX Hex is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode,
follow the instructions below:
1. Press <MENU> repeatedly until Set shows on the display.
2. Press <ENTER> to accept.
3. Press <UP> or <DOWN> to select on or oFF.
4. Press <ENTER>.

IRC-6 Operation

Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
To adjust the speed of the automatic program:
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
Manual Color Control
To manually control the RGB percentage:
NOTE: Only three colors can be used at once.
To set all LEDs to full intensity:
Miscellaneous Operation
To adjust the output level of the LEDs in manual color mode:
To black out the lights:
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>.
You may have inadvertently activated Black Out.
Wash FX Hex User Manual Rev. 1
• Press <AUTO> on the IRC-6.
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed of the program.
• Press <SOUND> on the IRC-6.
• To choose a specific color with the IRC-6: Press any number between <0>–<9>
to choose your color.
1. Press <MANUAL> on the IRC-6.
2. Press <R> (red), <G> (green), <B> (blue), <A> (amber), <W> (white), or
<UV>/<P> (UV) to choose your color.
3. Press <+> or <–> to increase or decrease the percentage of each color.
• Press <0> on the IRC-6.
• Press <%> repeatedly on the IRC-6.
• Press <BLACK OUT> on the IRC-6.
Page 13 of 18