· Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document. Page 4 of 19 Wash FX User Manual Rev. 1 User Manual Rev. 1...
2. I NTRODUCTION Product Overview Microphone Fuse Holder DMX Out Indicator Lights DMX In Power Out Control Safety Loop Power In Display Buttons Cooling Fan Wash FX User Manual Rev. 1 Page 5 of 19...
ETUP AC Power The Wash FX™ has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Wash FX™ may be mounted in any position; however, make sure adequate ventilation is provided around the product. · Rigging Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
Press <MENU> repeatedly to reach the menu’s main level and Addr shows on the display. Press <ENTER> and 001-d512 will show on the display. Use <UP> or <DOWN> to select the starting address. Press <ENTER>. Page 10 of 19 Wash FX User Manual Rev. 1 User Manual Rev. 1...
0–100% Red Zone 4 000ó255 0–100% Green Zone 4 000ó255 0–100% Blue Zone 4 000ó255 0–100% Red Zone 5 000ó255 0–100% Green Zone 5 000ó255 0–100% Blue Zone5 000ó255 0–100% Wash FX User Manual Rev. 1 Page 11 of 19...
246ó255 Sound-Active Auto Program Speed 000ó255 Slow to fast 000ó010 No function Auto or Sound 011ó127 Auto Program Sound-Active 128ó255 Wash™ FX Zones for DMX Control Page 12 of 19 Wash FX User Manual Rev. 1 User Manual Rev. 1...
Press <ENTER> and rUn will show on the display. Press <ENTER>. NOTE: While in Automatic mode, the Wash™ FX will respond to sound. The product will only respond to low frequencies of music (bass and drums). Wash FX User Manual Rev. 1 Page 13 of 19...
Press <MENU> to reach the menu’s main level and Addr shows on the display. Use <UP> or <DOWN> until Ver shows on the display. Press <ENTER>. Page 14 of 19 Wash FX User Manual Rev. 1 User Manual Rev. 1...
Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master. · Do not connect more than 31 slaves to the master. Wash FX User Manual Rev. 1 Page 15 of 19...
Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans using compressed air because you could damage them. Page 16 of 19 Wash FX User Manual Rev. 1 User Manual Rev. 1...
Maximum External Temp. Cooling System 104 °F (40 °C) Fan-assisted Convection I/O Connectors Channel Range 3-pin XLR 7 or 23 Ordering Product Name Item Code UPC Number Wash™ FX 07050844 781462211929 Wash FX User Manual Rev. 1 Page 17 of 19...
FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 18 of 19 Wash FX User Manual Rev. 1 User Manual Rev. 1...
Outside the U.S., United Kingdom, Ireland, or Mexico, contact the dealer of record and follow their instructions to request support or to return a product. Visit the Chauvet website for contact information. Wash FX User Manual Rev. 1 Page 19 of 19...