Setting Reactive Power Control; Setup Fixed Power Factor Mode; Setup V-Watt And Volt-Var Mode - SAJ AS1-3KS-5.1 User Manual

Appendix II: Setting Reactive Power Control

Setup Fixed Power Factor mode

The characteristic power factor curve for cosφ (P) (Power response)
mode varies
the displacement power factor of the output of the inverter in
response to changes
in the output power of the inverter.
The response curve required for the cosφ (P) defined within
displacement power
factor of 0.8 leading to 0.8 lagging.

Setup V-Watt and Volt-Var mode

This inverter complies with IEC 62109-2 clause 6.3 for power quality
response
modes. The inverter satisfies grid connection rules requirements for
volt-watt and
volt-var Settings. e.g.: AS4777 series setting as below :
- 74 -