Procedure Of Three Phase Meter Address Setting - SAJ AS1-3KS-5.1 User Manual

Power on
once
SET
Measure
display
ESC
twice
once
ESC
Fig. 4.19 Procedure of three phase meter address setting
① Power on the meter and enter the "Measure display" interface,
then press
② Press
increment per button pressing.
③ Pressing
methods to adjust value as for the first digit, then adjust the third
digit in a same way, set the default password into 701.
④ When the password entered correctly, press
the Port interface then press
page, and press
⑤ Pressing
once
SET
once
SET
ESC
button twice for entering password 701.
button once to adjust the value of the first digit, one
botton once to shift to the second digit, same
button once to start to set meter address.
buttom to adjust the value of address, one
once
Add
thrice
for three times to enter address
- 57 -
once once
SET SET
Shift Shift
twice
SET
Password correct, enter
twice to enter
once
Add
the setting interface