Including More Systems In Your Storage Space - Adaptec RAID 3085 User Manual

13
Click Apply, then click Yes.
Adaptec Storage Manager builds the logical drive(s), indicated by a magnifying glass
moving across the new logical drive icon in the Logical Devices View. The configuration is
saved on the Adaptec controller and on the physical drives.
14
Repeat Steps 1 to 13 for each controller on your system.
15
Partition and format your logical drives. See
If your storage space comprises one or more Adaptec RAID controllers on a single system,
building is complete. Continue with
If you have installed Adaptec RAID controllers on more than one system and wish to add them
to your storage space, continue with

Including More Systems in Your Storage Space

Note:
Adaptec Storage Manager must be installed on every system that will be part of your storage
space.
If you have installed Adaptec RAID controllers on more than one system, to continue building
your storage space:
From each individual system, log in to Adaptec Storage Manager and repeat Steps
●
continue building your storage space, or
From your local system, log in to all the other systems as remote systems (see
●
repeat Steps 1 to 15 to continue building your storage space.
The maximum number of supported RAID controllers varies depending on your operating
system. See RAID Controller Support on page 55
When your storage space is complete, continue with
Getting Started Step 4: Building Your Storage Space
A magnifying glass means that a logical drive is being built.
It disappears once the logical drive has been created.
page 48
Managing Your Storage Space on page
Including More Systems in Your Storage Space on page
for more information.
Managing Your Storage Space on page
for more information.
56.
page
53
●
53.
1 to 15 to
58), then
56.