Adaptec RAID 3085 User Manual page 96

d
When done, click Cancel to close the Add System window.
The systems you added appear in the Notification List. Although you can't sort the list, you
can reorganize the columns by clicking and dragging the column heads.
You can specify which levels of events are sent to individual systems by following the
instructions in Modifying a System's Address, Host Name, or Notification Level on page
4
Close the Notifications window when you're done.
Note:
You can access other utilities in this window, such as the Task Manager (see
Tasks on page 110), by clicking their tabs.
5
Repeat Steps 1 to 4 for each system you want to monitor with event notifications.
Sending a Test Event
To ensure that a system is receiving logged notifications, you can send a test event.
To send a test event:
1
Open the Notification Manager. (See
Note:
You can also access the Notification Manager by selecting the system you want in the
Enterprise View, then (on the menu bar) clicking Actions > Agent actions > Configure >
Notifications tab.
2
In the Notification List, click on the system you want to send a test event to.
Note:
You can only send a test event to one system at a time.
3
On the menu bar, select Actions, then click Send test event.
The test event is sent. A message appears indicating either that the test event was sent
successfully or that the test failed. (Click OK to clear the message.)
If the test is successful, the receiving system beeps once, and its Event Viewer shows that a
test event was received.
Chapter 8: Monitoring Your Storage Space
page 94.)
96
●
97.
Managing
Test event