If the test fails:
a
Ensure that the receiving system is powered on and running Adaptec Storage
Manager.
b
Open the receiving system's System Properties window (see
double-check the TCP/IP address and port number.
c
Try sending the test event again.
Managing the Event Notification List
This section describes how to manage systems in the Notification List:
To add a system to the Notification List, see
●
To modify a system's connection information, see the following section.
●
To remove a system from the Notification List, see
●
Modifying a System's Address, Host Name, or Notification Level
If you want to specify the notification level for a system, or if the TCP/IP information or host
name of a system changes, update its properties in the Notification Manager.
Note:
Does this system receive event notifications from more than one other system? Ensure you
enter the updated information in the Notification Manager of all affected systems.
To modify system information:
1
Open the Notification Manager. (See
2
In the Notification List, click on the system you want to modify.
3
In the System Properties window, enter the new information or select a new notification
level in the Event Type drop-down menu, then click OK.
The Notification List shows the modified information.
Removing a System from the Notification List
You can remove any system (including the local system) from the Notification List. Once a
system has been removed, logged notifications from the local system are no longer sent to it.
To remove a system from the Notification List:
1
Open the Notification Manager. (See
2
In the Notification List, click on the system you want to remove.
Chapter 8: Monitoring Your Storage Space
page
94.
page
97.
page
94.)
page
94.)
97
●
Step 3 on page
97) and