Installing On Netware; Starting The Command Line Utility - Adaptec RAID 2230SLP User Manual

Installing on NetWare

To install ARCCONF or HRCONF on NetWare:
You need the latest Support Pack for your operating system so you can
run the supported Java Virtual Machine (JVM). You need JVM version
1.3 or later. To check your JVM version, load JVM, type JAVA -
VERSION.
Note: For the latest updates from Novell, visit
Insert the Adaptec Storage Manager CD.
1
From the command prompt, type load cdrom and press Enter.
2
From the command prompt, type:
xx_yy_zz:\netware\manager\install
where xx is the product CD, yy is the version number, and zz is
the release number. For example:
adptcd_v2_01
The installation program starts.
Follow the on-screen instructions to complete the installation.
3

Starting the Command Line Utility

To start ARCCONF or HRCONF, enter one of the following commands:
Windows:
c:\<install_dir*>\<name of utility>.exe
Linux:
/usr/StorMan/<name of utility>
NetWare:
load <name of utility>
install_dir* is the directory where the utility is installed and name
of utility
is ARCCONF or HRCONF
To see a list of available commands, type ARCCONF or HRCONF at the
prompt. The utility command functions are detailed in the next
chapter, Using the Command Line
Getting Started with the Command Line Utility
Utility.
www.novell.com
.
9
●
.